Cleaning and care
Burners
The burner can be dismantled and cleaned when cool.
^Remove the burner parts and wash them in a solution of warm water and liquid dish soap. Dry them thoroughly. Make sure that the flame holes are clean and completely dry.
^Wipe the burner base clean with a damp cloth and then dry.
^Gently wipe the ignitor and ignition safety control with a slightly damp cloth, and then wipe dry.
Make sure that no liquid gets into the appliance.
Reassembling the burner
^Place the burner head o onto the burner base r, making sure that the thermocouple p and the ignitor q align through the holes in the burner head. The burner head must fit into place properly.
^Place the burner cap n evenly onto the burner head o.
Once the burner cap is in the right position, it will not move.
Be careful not to mix up the parts.
17
