IMPORTANT SAFETY INSTRUCTIONS
Technical Safety
Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.
Be sure your appliance is properly installed and grounded by a qualified technician.
Do not use an extension cord to connect this appliance to electricity. Extension cords do not guarantee the required safety of the appliance.
Be sure that the power cord does
not come in contact with any "hot spots" after installation.
This appliance must not be installed or operated outdoors.
Before installation or service,
disconnect the power supply to the work area by unplugging the unit, "tripping" the circuit breaker or removing the fuse.
Before installing the fryer, check for external visible damage. Do not operate a damaged appliance.
Do not use the appliance until it has been properly installed in the countertop.
Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Service Department.
Be certain your appliance is properly installed and grounded by a qualified technician.
To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.
Before installation, make sure that the voltage and frequency listed on the rating label correspond with the household electrical supply. This data must correspond to prevent injury and appliance damage. Consult a qualified electrician if in doubt.
Under no circumstances open the outer casing of the appliance.
In the event of damage to the appliance, it must be turned off immediately and disconnected from the main power supply. Contact Miele’s Technical Service Department.
Do not use the appliance until it has been repaired. Ensure power is not supplied to the appliance until repair work is completed.
Defective components should be
replaced with Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.
4
