Operation
Turning on and off / Regulating
The control knob is used to turn on the burner and to regulate the strength of the flame.
The gas supply is turned off
Ignition setting
Highest flame
Lowest flame
The knob must only be turned left to turn the appliance on and right to turn it off.
If the knob is :
-turned on without pressing it down first,
-turned clockwise to turn on, or
-turned counterclockwise to turn the combiset off,
parts of the combiset might get damaged. The manufacturer cannot be held responsible for these damages.
Turning on
To turn on the burner, press the control knob down and turn it counterclockwise to the ignition position to turn on.
When the flame ignites, keep the control pressed in for
If the burner does not ignite or the flame goes out, turn the control knob to "". Try again after a few seconds.
If the burner still will not ignite after the second attempt, turn the control knob to "" and see "Frequently asked questions".
Adjust the knob to the desired setting.
12
