Miele CS 1028 installation instructions Cut out, Installation

Installation

Cut out

￿Make the countertop cut-out for one or more appliances as applicable. Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the right or left of the hob. See "IMPORTANT SAFETY INSTRUCTIONS".

￿Seal the cut surfaces with a suitable heat-resistant sealant to avoid swelling caused by moisture.

The materials used must be heat-resistant.

If during installation the seal around the frame does not sit flush with the countertop in the corners, the corner radius, maximum 3/16" (4 mm), can be carefully filed down to fit.

27