Installation
Installing the appliance(s)
Feed the power cord down through the
Place the front edge of the appliance into the
With a hand on each side of the appliance press down evenly on the edges until it clicks into position. When doing so make sure that the appliance seal sits tightly on the countertop to ensure it is sealed correctly. This is important to ensure an effective seal. Do not permanently seal into the countertop.
Push the installed appliance to the side until the holes in the support bar are visible.
Insert the cover d into the holes in the support bar b.
Place the front edge of the next appliance into the
Connect the appliance(s) to the main power supply (see "Electrical connection").
Turn the appliance(s) on and check the function.
The appliance may be lifted out using a special tool.
The appliance can also be pushed up and out from underneath. Note: push the rear out first.
36
