Installation |
|
|
|
| |
| Only use the template for lightshields | ||||
| with the following lengths: |
| |||
|
| DA 262 i | DA 272 i | Da 292 i | |
| b | 598 mm | 698 mm | 898 mm | |
| c | 597 mm | 697 mm | 897 mm | |
| d | 596 mm | 696 mm | 896 mm | |
| e | 595 mm | 695 mm | 895 mm | |
| f | 599 mm | 699 mm | 899 mm | |
|
| DA 262 i | DA 272 i | Da 292 i | |
| b | 23 9/16" | 27 1/2" | 35 3/8" | |
| c | 23 1/2" | 27 7/16" | 35 5/16" | |
| d | 23 1/2" | 27 7/16" | 35 5/16" | |
| e | 23 7/16" | 27 3/8" | 35 1/4" | |
Pull out the snap fittings from the | f | 23 9/16" | 27 1/2" | 35 3/8" | |
|
|
|
| ||
slots on the left and right hand sides | With other lengths adjust the measure- | ||||
of the deflector plate (1). | |||||
ments accordingly. |
|
| |||
Press the baffle (2) into the engaging |
|
| |||
|
|
|
| ||
point. Put the snap fittings back in |
|
|
|
| |
place. |
|
|
|
| |
The snap fitting with the hole must |
|
|
|
| |
be inserted on the right. |
|
|
|
| |
Do not wipe off any lubricant.
Hold the template supplied against the back of the lightshield and mark the drill hole positions for fixing the hinges.
20 |
