Electrical connection

For CDN only:

The cooker hoods are supplied with a

1.50m power supply cable ready for connection to an a.c. single phase 120 V / 60 Hz supply.

Caution:

Ensure that power supply is OFF during installation.

Important

The wires in the power supply cable are colored in accordance with the fol- lowing code:

Green = ground

Black = live

White = neutral

WARNING

THIS APPLIANCE MUST BE GROUNDED

For USA only:

The cooker hoods are supplied with a 5 ft power supply cable ready for con- nection to an a.c., single phase,

120 V / 60 Hz supply. Connection should be made in the junction box.

Important

The wires in the power supply cord are colored in accordance with the follow- ing code:

Green/yellow = ground

Blue = neutral

Brown = live

As the colors of the wires in the power supply cord of this appliance may not correspond with the colored markings identifying the terminals in your junction box, proceed as follows:

The wire which is colored green and yellow must be connected to the termi- nal junction box which is marked by the letter E, or by the earth symbol z

or colored green or green and yellow.

The wire which is colored blue must be connected to the terminal which is marked with the letter N or colored white.

The wire which is marked brown must be connected to the terminal which is marked with the letter L or colored black.

WARNING

THIS APPLIANCE MUST BE

GROUNDED

13

Page 13
Image 13
Miele DA 292 I, DA 272 I, DA 262 I manual Electrical connection, For CDN only, For USA only