IMPORTANT SAFETY INSTRUCTIONS
Before installation make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond in order to avoid risk of damage to the appliance. If in doubt, consult a qualified technician.
The electrical outlet should be easily accessible after installing the unit.
Be sure that after installation the power cord does not come into contact with any hot surfaces.
ESW 4082-14 / ESW 4088-14
Only install the warming drawer in combination with
To install the warming drawer in
combination with another appliance, a
The food warming drawer must be installed so the contents of the drawer can be seen. Otherwise spills could cause burns or scalding.
Be sure there is enough space for the drawer to be pulled out completely.
This appliance is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for an installation in these applications. Please contact the Miele Technical Service Department with specific requirements.
When installed in combination with another appliance, the warming drawer must always be installed beneath the other appliance. The combination appliance can be set without a base directly onto the plate warmer. A shelf between the appliances is not necessary.
The building in dimensions of the warming drawer must be added to the building in dimensions of the combination appliance to determine the niche size required.
Note to the installer:
Please leave these instructions with the consumer of the appliance for the local building inspectors use.
SAVE THESE INSTRUCTIONS
24
