Cleaning and care
Changing the light bulb
The lighting automatically switches off after the door has been open for approx. 5 minutes. This is not a fault.
After the bulb has cooled for a short time it will turn on again.
If the light does not come on when the door is opened briefly, the light bulb should be changed.
Use the main switch to turn the appliance off.
To reduce the risk of electric shock, disconnect the appliance from the power supply by unplugging or tripping the circuit breaker.
Upper lighting
Grasp the front of the light cover with both hands, and slide it back.
Carefully pull the cover forward and out.
Never touch a halogen bulb with bare fingers.
When inserting a glass halogen bulb always hold with a soft cloth.
Remove the defective light bulb.
Place the new bulb in the socket. Halogen bulb type:
20 W/12 V/socket GY 6.35.
Slip the rear of the light cover back into position, then pull it forward and into place.
28
