Miele F 1911 SF, F 1811 SF, F 1801 SF, F 1901 SF Aligning the appliance, Installing the appliance

Installing the appliance

Aligning the appliance

￿Align the appliance with the surrounding cabinets.

The height-adjustable feet at the front and rear can all be adjusted from the front.

–Front: with an open-ended wrench ½" (SW 13).

The feet can be adjusted from the top and bottom ￿.

–Rear: with a 5/16" (8 mm) hex nut driver via flexible shaft ￿.

Important!

When unscrewing the height-adjustable feet, proceed gradually, alternating between left and right.

–Unscrew the height-adjustable feet until the mark on the base has reached the indicated guide dimension 1 1/4" (32 mm). The guide dimension of 1 1/4" (32 mm) is related to a niche height of 84"

(2134 mm).

￿Align the appliance again using a level.

￿If using a wooden beam as an alternative anti-tip device, rotate the appliance all the way toward the wooden beam.

Note:

–Do not twist or jam the appliance inside the niche. When unscrewing the height-adjustable feet, proceed gradually, alternating between left and right.

–The adjustment of the rear feet is aided if the appliance is lifted at the rear (tipped forward slightly).

63