Miele F 456 i-3 Switching on and off, Before using for the first time, Switching off the alarm

Models: F 456 i-3

1 48
Download 48 pages 38.87 Kb
Page 13
Image 13
Switching on and off

Switching on and off

Before using for the first time

^Clean the inside of the appliance and the accessories with luke warm water and a little washing up liquid and then dry using a soft cloth.

Important: To ensure correct functioning of the appliance, let it stand for between 1½ and 2 hours after transporting it to its final location before connecting it to the mains.

Switching on

^Using a coin turn the On/Off dial in a clockwise direction away from the "0" position.

Forcing it beyond its range would damage it. Turn it only as far as it will go, then turn it back again.

The alarm indicator light flashes. An alarm sounds after a short while and the appliance starts cooling.

Allow the appliance to cool for a few hours before placing food in it. This will ensure that the temperature is sufficiently low.

Switching off the alarm

^Press the alarm button.

The alarm stops. The indicator light remains lit until the temperature which has been set is reached.

Cool pack

Place the cool pack in the top drawer or to save space on the freezer tray. The cool pack will be at its most effective after it has been in the freezer for approx. 24 hours.

Switching off

^Using a coin turn the On/Off dial in an anti-clockwise direction back to the "0" position.

All indicator lights go out and the cooling process is switched off.

13

Page 13
Image 13
Miele F 456 i-3 Switching on and off, Before using for the first time, Switching off the alarm, Cool pack