Miele F 456 i-3 installation instructions Temperature display, The correct temperature

Models: F 456 i-3

1 48
Download 48 pages 38.87 Kb
Page 16
Image 16
Temperature display

The correct temperature

Temperature display

During normal operation the temperature display on the control panel shows the temperature in the warmest part of the appliance. Ranges of temperatures rather than individual temperatures are shown. This means that the temperatures displayed are approximate.

If you have adjusted the temperature dial in order to set a different temperature, wait for approx. 6 hours if the freezer is not very full and for approx. 24 hours if the freezer is full before checking the temperature display. It will take this long for the display to show the accurate temperature of the freezer. If the temperature displayed is too low or too high, then adjust the temperature once more.

A temperature above -18 °C is no cause for concern in the following circumstances:

when the appliance has just been switched on,

when the door has been left open for a while, e.g. for removing or storing a large amount of food,

when fresh food is being frozen.

However, if the temperature remains above -18 °C for a long time, check that the frozen food has not started to defrost. If this is the case, check that the food is safe to use and if it is, then use it as soon as possible.

16

Page 16
Image 16
Miele F 456 i-3 installation instructions Temperature display, The correct temperature