Additional options
Buzzer
A signal sounds at the end of a program and when a fault occurs.
The buzzer at the end of a program sounds five times in quick succession for up to one hour.
The buzzer for a fault sounds continuously for up to two minutes.
The buzzer is activated by default. It can be turned off, so it does not sound at the end of a program. The buzzer for a fault cannot be turned off.
Open the door.
Turn the dishwasher off with "".
Press the "Program" button and at the same time turn the dishwasher on with "".
Hold the program button until the "Rinse & Hold" program indicator comes on.
If it does not come on, start over.
Press the "Program" button four times.
The "Intake / Drain" indicator flashes four times in intervals.
The setting can be recognized by the flashing of the "SaniWash" indicator:
–flashing: buzzer is activated
–not lit up: buzzer is deactivated
To change the setting press the "Program" button for at least one second, until the "Intake / Drain" indicator lights up.
Press the "Program" button. The setting is saved.
Turn the dishwasher off "".
27
