Additional options
Default settings
All settings can be reset to the factory default.
Open the door.
Turn the dishwasher off "".
Press and hold the "Program" button and at the same time turn the dishwasher on "".
Hold the "Program" button until the "Rinse & Hold" program indicator comes on.
If it does not come on, start over.
Press the "Program" button 12 times.
The "Intake / Drain" indicator flashes once long and twice short in intervals.
The setting can be recognized by the flashing of the "SaniWash" indicator:
–flashing: all settings are factory default
–not lit up: at least one setting was changed
To change the setting press the "Program" button for at least one second, until the "Intake / Drain" indicator lights up.
Press the "Program" button. The setting is saved.
Turn the dishwasher off "".
28
