Interrupting a program, Changing a program | Miele G 2732 instruction

Use

Interrupting a program

A program is interrupted as soon as the door is opened. If the door is closed, the program will continue from where it was interrupted.

Open the door with care. The water in the dishwasher is hot. Danger of scalding. Before closing the door again, leave it ajar for approx. 20 secs. This will enable the temperature in the wash cabinet to settle. Close the door firmly until it clicks into place.

Changing a program

If the detergent flap is already open do not change the program.

If a program has already started and you wish to change it:

Sensor Wash

Rinse	1:30 h

	Cancel

Select Cancel and confirm with "OK". The program is canceled.

Sensor Wash

End

Back

Select Back and confirm with "OK" .

The display changes to the program menu.

Select and start the desired program as usual.

36

Image 36

Miele G 2732 manual Interrupting a program, Changing a program

Contents

Operating Instructions Dishwasher 2732 Contents Contents Important Safety Instructions Electrical Safety Installation Use Disposal of an appliance Guide to the dishwasher Control panel Display function Caring for the environment Energy saving washing Before using for the first time To open the door Child Safety LockTo close the door 1200 Water softener External water softener Filling the salt container Salt refill message Rinse aid Adding rinse aid Rinse aid refill message Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Split cutlery tray Upper basket Removable spike insertRemoving the insert Replacing the insert Adjustable cup racks Coffee bar Universal support bar Adjusting the upper basket Lower basket Foldable spikes Removable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use Detergent Adding detergent Turning on Selecting a program Program When to use Program sequence Program guide Usage To normally soiled Selecting options TurboPre-rinse Soak Starting a program Time display At the end of a program Preparing your appliance for an extended vacaion Interrupting a program Changing a program Delay Start Starting a program before the delay start has elapsedAdditional options Settings Opening the Settings menuLanguage Time of day Water hardness Adjust Sensor Wash Filter check Reorganize program list Save options Temperature Unlocking the dishwasher Buzzer in case of a fault Buzzer volumeBuzzer Buzzer at the end of a program Button tone Memory BrightnessContrast RemoteVision Factory default Leaving the Settings menuTurning the demo mode on Turning the demo mode off RemoteVision Frequently asked questions Technical faults Frequently asked questions Problems water intake/drain Issue Possible fault Solution Buzzer sounds. Displays the faultProgram Energy Saver General problems with the dishwasher Issue Possible fault Solution Display turns off Issue Possible fault Solution Detergent is left Dispenser at the end of aProgram Detergent lid cannot Sounds Poor cleaning results Issue Possible fault Solution Dishes are not dry Glasses and cutleryAre spotted White residue is Issue Possible fault Solution Glasses are Discolored Film cannot be wiped Off Clouding or etchingOn glasses Glasses are dull Comparison Tests Comparison Tests After sales service PC UpdateRepairs MieleCare Transport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door seal Cleaning the triple filter Triple filter system Cleaning and Care Cleaning the spray arms Removing the spray arms Cleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding Instructions Plumbing Waterproof systemConnection to the water supply Drainage Venting the drainage systemPage Page Alteration rights reserved Nr 724 110 2732