Frequently asked questions
Issue | Possible fault | Solution |
Dishes are not dry, | The rinse aid setting may be | Increase the dosage, refill |
glasses and cutlery | too low, or the rinse aid | the reservoir or switch the |
are spotted. | reservoir is empty. | rinse aid product when |
|
| refilling, see "Before using |
|
| for the first time". |
| Dishes were taken out too | Leave dishes in longer, see |
| soon. | "Use". |
| A "Tab" product was used. | Set the Detergent setting for |
| These products have a low | a normal (powder or gel) |
| drying effect. | detergent and add rinse aid. |
| The "Tab" setting is turned | Set the Detergent setting to |
| on, but a normal (powder or | the detergent used, see |
| gel) product was used. | "Additional options - Tab". |
White residue is | Not enough rinse aid was | Increase the dosage, see |
visible on cutlery | used. | "Before using for the first |
and dishes. |
| time". |
Clouding occurs on | The salt container is empty. | Refill the salt container, see |
glassware and film |
| "Before using for the first |
can be wiped off. |
| |
| time". | |
|
| |
| The salt container lid was | Reseat it making sure it |
| not correctly screwed on. | screws back on correctly. |
| Unsuitable "Tab" products | Change detergent, use |
| were used. | normal (powder or gel) |
|
| detergent. |
| The water softener is | See "Before using for the |
| programmed on too low a | first time". |
| setting. |
|
55
