Troubleshooting

Problem: The remote can’t be programmed to operate your component.

•You may be too far away from the component or at a wrong angle. This remote uses IR (infrared) technology to communicate with components. The remote sends the code and the component’s IR sensor reads the code.

Therefore, there must be an unobstructed path between the remote and the IR sensor on the component. Move closer and make sure you point the remote at the component (VCR when programming the VCR1 or VCR2 key; DVD/CD when programming the DVD key; TV when programming the TV key; CABLE box when programming the CABLE key; SATELLITE receiver when programming the DBS•SAT key).

•If you’ve entered all of the codes for your brand that are in the enclosed Code Lists and followed the instructions, try one of the Code Search methods (See Code Search on page 11).

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR1 or VCR2, DVD, DBS•SAT, CABLE, AUDIO, AUX) so the remote knows which component you want to operate.

•To program the eight-component universal remote to operate a combination unit (TV/VCR or TV/DVD), first try the VCR or DVD codes for your brand. Some units, however, require that you program both the TV key (using the TV codes) and the VCR or DVD key (using the VCR or DVD codes) for full operation.

•To program the eight-component universal remote to operate a combination unit (VCR/DVD), program the VCR key using the VCR codes and then program the DVD key using the DVD codes.

Problem: The indicator light does not light when you press a key.

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR1 or VCR2, DVD, DBS•SAT, CABLE, AUDIO, AUX) so the remote knows which component you want to operate.

•You may have pressed an invalid key for the mode the remote is in (e.g., the RECORD key only works in VCR Mode).

•Make sure the batteries are properly installed. (See Battery Installation on page 3).

•Replace the batteries with two new AA batteries. Reprogramming may be required.

Problem: The remote does not operate your component.

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR1 or VCR2, DVD, DBS•SAT, CABLE, AUDIO, AUX) so the remote knows which component you want to operate.

•Remove any obstacles between the remote and the component. Make sure to aim the remote at the IR sensor on the component.

•Make sure the batteries are properly installed. (See Battery Installation on page 3).

•Replace the batteries with two new AA batteries. Reprogramming may be required.

•Reset the remote. Remove the batteries. Then press and hold the number 1 key on the remote for several seconds to reset the microprocessor inside the remote. Release the number 1 key, reinstall the batteries, and try the remote again. Reprogramming will be required.

Problem: The remote is not performing commands properly.

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR1 or VCR2, DVD, DBS•SAT, CABLE, AUDIO, AUX) so the remote knows which component you want to operate.

•Make sure the component is “ready” (e.g., DVD player has disc loaded; VCR has tape loaded, etc.).

•You may have pressed an invalid key for the mode the remote is in (e.g., the RECORD key only works in VCR Mode).

•If you are trying to turn on an RCA, GE or PROSCAN component, press the component

key (TV, VCR1 or VCR2, DVD, DBS•SAT, CABLE, AUDIO, AUX) instead of the ON•OFF key.

•If operating a VCR to record, you must press the RECORD key twice.

•If you’re trying to change channels, try pressing the ENTER key after entering the channel number as this is a requirement of certain models and brands.

•There is a possibility that a programmed code may only be able to control some of your component features (e.g., only turns a component on and off). Follow the steps provided for programming the remote (See Programming sections on pages 5-9). If the component can be turned on and off, make sure you press the CH+/CH- key to see if the component responds. If not, try the next code from the list.

14

RCU800

Page 13 Page 15
Page 14
Image 14
RCA RCU800B manual Troubleshooting
Page 13 Page 15

RCU800B specifications

The RCA RCU800B is an advanced universal remote control designed to streamline the operating experience across a multitude of devices. As the typical entertainment setup features various components such as televisions, DVD players, satellite boxes, and streaming devices, the RCU800B offers a seamless solution for managing these devices from a single point of control.

One of the standout features of the RCA RCU800B is its compatibility with a vast array of devices. It can effortlessly control up to eight different devices, including TVs, sound systems, and streaming devices. This level of versatility makes it an ideal choice for households with diverse media setups, providing a single remote for users to manage all their devices efficiently.

The RCU800B employs a user-friendly interface that simplifies the navigation process. The buttons are intuitively labeled, which allows users to quickly become accustomed to the layout. The remote features dedicated buttons for popular streaming services such as Netflix, Hulu, and YouTube, enabling users to directly access their favorite content without scrolling through menus.

Another significant characteristic of the RCA RCU800B is its learning capability. For devices that may not be included in its extensive database, users have the option to program the remote to learn commands from the original remote control. This feature ensures that virtually any device can be integrated, making it an accommodating choice for those with unique or older devices.

The remote control also employs powerful infrared (IR) technology, which provides reliable performance over long distances, ensuring that users can control their devices even from across the room. Additionally, the RCU800B allows for the customization of macro commands, meaning users can program a single button to execute multiple commands at once. This could include turning on the TV, switching inputs, and adjusting the volume with a single press, creating a more streamlined experience.

Ergonomically designed, the RCA RCU800B fits comfortably in the hand, making extended use easy and convenient. Its robust construction ensures durability over time, while the battery compartment is designed for quick access, allowing for effortless battery replacement.

In summary, the RCA RCU800B is a versatile, user-friendly universal remote control that encompasses an array of features and technologies designed for modern entertainment needs. Its compatibility, intuitive layout, learning capabilities, and customizable functions make it a valuable addition to any household's media system, eliminating the clutter of multiple remotes.
Top Page Image Contents