RCA RCU800B manual Program for VCR1 and VCR2-Direct Entry Method

Program for VCR1 and VCR2—Direct Entry Method

In order for the eight-component universal remote to control your VCR, you must program it with the code that matches your VCR. If you have two VCR's, the second VCR can be programmed using the VCR2 key. To program your remote to control your VCR, follow these steps:

1.Manually turn on the VCR.

2.Locate the enclosed VCR Code List. Find your brand in the VCR Codes.

Note: If your brand isn’t listed, use one of the Code Search methods to program this remote control. (See section on Code Search on page 11).

3.Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key.

4.Press and release the VCR1 or VCR2 key. The indicator light blinks and then remains lit.

5.Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid three-digit code, the indicator light turns off.

Note: If you enter an invalid code, the LED flashes rapidly for two seconds. Start over at step 3.

6.Aim the remote at your VCR. Press the ON•OFF key. If your VCR turns off, you have found the correct code.

7.Enter the code in the box provided on this page for future reference.

8.If your VCR does not turn off, repeat steps 3-6 above, entering the next code for your brand.

If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote. (See Code Search section on page 11).

CODE INDICATOR SEARCH LIGHT

VCR1 VCR2 (BLINK)

(OFF)

ON•OFF

VCR1 CODE

VCR2 CODE

Program for DVD/CD Systems—Direct Entry Method

In order for the eight-component universal remote to control your DVD or CD systems, you must program it with the code that matches your component. To program your remote to control your DVD/CD system, follow these steps:

1.Manually turn on the DVD/CD system.

2.Locate the enclosed DVD or CD Code List. Find your brand in the DVD or CD Codes.

Note: If your brand isn’t listed, use one of the

Code Search methods to program this remote control. (See section on Code Search on page 11).

3.Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key.

4.Press and release the DVD key. The indicator light blinks and then remains lit.

5.Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid three-digit code, the indicator light turns off.

Note: If you enter an invalid code, the LED flashes rapidly for two seconds. Start over at step 3.

CODE INDICATOR SEARCH LIGHT

DVD (BLINK)

(OFF)

6 RCU800