RCA RCU800B manual Primary Key Descriptions For Video Operations, Other Keys Listed Alphabetically

Primary Key Descriptions For VIDEO Operations

Other Keys (Listed Alphabetically)

Certain keys on the eight-component universal remote have dual functions. Primary functions are printed in black. Secondary key functions are printed in blue on the remote and are used for AUDIO operations.

0-9(Number Keys): operate the same as number keys on your original remote and are used to enter component codes when programming the remote control with Direct Entry method.

ANTENNA: in TV Mode, switches between the signal coming from a satellite receiver or cable box and an off-air antenna. In VCR Mode, switches between the signal coming from a VCR and a TV.

CH+ and CH- (CHANNEL UP and CHANNEL DOWN): goes to the next highest or lowest channel number in the component channel list, respectively, except for DVDs. In DVDs, the CH+ and CH- keys refers to the NEXT/PREVIOUS chapter.

CLEAR: removes the on-screen display to return to normal viewing.

CODE SEARCH: use to program the remote.

ENTER: use with Manual or Automatic Code Search method to accept code (See Code Lists enclosed). Also, some brands require you to press the ENTER key after you enter a channel number. In some menu systems, you must press the ENTER key to select a highlighted item.

GO BACK: switches back to previous channel– operates the same as PREV CH, LAST CHANNEL or RECALL keys found on some brands of remote controls.

GUIDE: brings up the on-screen TV program guide, if your TV is equipped with that feature.

INFO: shows program information, if your component is equipped with this feature. Functions the same as a DISPLAY key.

INPUT: selects the video inputs of your TV, if equipped with this feature.

MENU•PROG: accesses DVD disc menus when playing

a DVD disc. Accesses menu systems of some TVs, a few RCA brand VCRs and satellite receivers. (For more information, refer to the On-screen Menus section on page 13).

MUTE: lowers the TV’s volume to its minimum level.

NAVIGATION KEYS & SELECT: used to move through on-screen menus and guides. Use the NAVIGATION keys to move the highlighted choice up, down, left or right.

ON•OFF: turns component on and off.

Note: Some RCA, GE and PROSCAN models require that you press the component key to turn the component on and the ON•OFF key to turn the component off.

PIP: (Picture-in-Picture) and SWAP operate your TV’s Picture-in-Picture, if your TV is equipped with this feature.

RECORD: use with VCR to record programming. You must press the RECORD key twice to start recording.

SLEEP: allows you to set a time to turn off your TV automatically.

VOL: increases or decreases the TV or AUDIO system’s volume level.

4 RCU800