Settings menu
Optimize standby
A few minutes after the last key is pressed or at the end of the program the dishwasher will turn off to save energy. The display and the indicators are turned off and only the Start/Stop indicator light flashes slowly.
If you do not turn the dishwasher off after the program ends, it will turn completely off after a few minutes in Standby mode.
This function can also be turned off. The display and the indicators stay on and the dishwasher will turn off after approx. 6 hours.
Select the desired setting and press the center button.
If refill salt and/or rinse aid or a fault are present in the display, the dishwasher will go into Standby mode.
The refill messages can be turned off when you use a tab detergent (see "Before using for the first time"). Fault messages cannot be turned off.
Deactivate indicators
If you consistently use "Tab" detergent products in your dishwasher, you can switch the Salt and Rinse Aid indicators off if desired.
Select the desired setting and confirm with the center button.
If you switch to using a detergent that does not contain salt or rinse aid, remember to replenish the salt and rinse aid and turn the indicators back on.
44
