Frequently Asked Questions
Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.
Technical faults
Problem | Possible fault | Solution | ||
After the dishwasher was | The machine is not | Insert the plug. | ||
turned on with the | plugged in. |
|
| |
button, the display stays | The circuit breaker has | Reset the circuit breaker. | ||
off and the "Start/Stop" | ||||
tripped. | See the data plate for | |||
indicator does not flash. | ||||
| minimum amperage. | |||
|
| |||
The dishwasher stops | The circuit breaker has | – Reset the circuit breaker | ||
during a program. | tripped. |
| (see the data plate for | |
|
|
| minimum amperage). | |
|
| – | If the circuit breaker | |
|
|
| trips again. Contact | |
|
|
| Miele. | |
One of the following |
| Before fixing the fault: | ||
faults appears on the |
| – Press the button to | ||
display: |
|
| turn the dishwasher off. | |
Fault FXX | There may be a | After a few seconds: | ||
| technical fault. | – Turn the dishwasher on. | ||
|
| – | Select the desired | |
|
|
| program. | |
|
| – | Press the Start/Stop | |
|
|
| button. | |
|
| If the fault is indicated | ||
|
| again, a technical fault has | ||
|
| occurred. | ||
|
| – | Contact Miele. | |
Waterproof | The waterproof system | – Turn off the water | ||
| has activated. |
| supply. | |
|
| – | Contact Miele. | |
47
