Settings menu
Rinse aid
For best results the rinse aid dosage can be adjusted.
The dosage can be set between
3 ml rinse aid.
The amount of rinse aid dispensed can be more than the value set due to the automatic adjustment of the "Sensor Wash" program.
If spots appear on the dishes:
– Use a higher setting for rinse aid.
If smearing or streaking show:
– Use a lower setting for rinse aid.
Select the desired rinse aid amount and confirm with the center button.
Buzzer
When the buzzer is activated, a tone sounds at the end of a program and if a fault occurs.
Buzzer at the end of a program
The buzzer at the end of a program sounds four times in intervals with a brief break in between. The buzzer sounds if the dishwasher has not been turned off.
The buzzer at the end of a program is turned off by default.
Buzzer in case of a fault
In the event of a fault, the buzzer sounds continuously.
The fault buzzer cannot be turned off.
Buzzer volume
There are seven different volume settings. If no volume level is selected, the buzzer is deactivated.
Select the desired volume and confirm with the center button.
43
