Using additional bases | 41 |
|
|
When the base is located, you will hear a confirmation tone and PIN? will be displayed.
7.Enter the base PIN code and press Menu .
You hear a tone to confirm you have entered the correct code and the handset returns to idle mode.
Once registered you will hear a confirmation tone and the next available handset number is allocated and shown in the display.
Selecting a base to use
If your handset has been registered to more than one base you can select which one it uses.
1.Press Menu .
2.Press Volor 
until REGISTER is displayed then press Menu .
3.Press Volor 
until SELECT BASE is displayed then press Menu .
4.All bases that your handset is registered to will be displayed, e.g. BASE 1 2 3 4.
The base that you are currently registered to will flash.
5.Enter the number of the base you want to use.
The default PIN code is 0000.
If registration is unsuccessful, after 1 minute, the handset will display the list of registered bases and you can try again or select another base to use.
If you are in an environment where there is a lot of electrical interference you may experience difficulty registering to a base.
