Frequently asked questions
Problem | Possible fault | Solution | |
In the program | The intake water does not | – Restart the program. | |
"Energy Saver" the | have a minimum | – If the fault is displayed | |
following fault is | temperature of 115°F | again, use a different | |
displayed: | (45°C). See "Plumbing". | program. | |
Water intake temp. too |
|
| |
low |
|
| |
The buzzer sounds. |
| Before fixing the fault: | |
The display shows |
| – Turn the dishwasher off | |
the following error |
| with the button. | |
message: | Fault in the water drain. | – Clean the triple filter. | |
Drain fault F11 | |||
There might be water in | – Clean the drain pump and | ||
| |||
| the wash cabinet. | the | |
|
| See "User Maintenance | |
|
| Instructions" for more | |
|
| information on the above. | |
|
| – Remove any kinks in the | |
|
| drain hose. |
62
