Use
Standby
A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy.
To turn the dishwasher back on press
.
This feature can also be turned off (see "Settings - Optimize standby"). The dishwasher will then turn off completely after 6 hours.
If the Standby setting is turned on and the Display clock is selected (see "Setting - Time of day"), the clock will only be displayed for a few minutes.
If refill salt and/or rinse aid or a fault are present in the display, the dishwasher will not turn off.
The refill messages can be turned off when you use a tab detergent (see
At the end of a program
At the end of a program the display
shows Program finished or Drying
plus with the door slightly open (if activated).
In the "Express" program, the drying fan will run for a few minutes after the program is completed.
Dishes tend to chip if removed still hot from the dishwasher. If the automatic door opening setting is deactivated (see "Settings - Drying plus") it is recommended to open the door manually to allow tableware to cool much faster.
Turn the dishwasher off .
The dishes can now be removed.
Unloading the lower basket first will prevent water drops from the upper basket and cutlery tray (depending on model) from dropping onto dishes in the lower basket.
Push the baskets in.
The dishwasher continues to use electricity until turned off with the button. After a few minutes the dishwasher will turn off automatically.
41
