Before using for the first time
Place the provided funnel over the salt container and carefully fill it with salt. The salt container holds approx. 4.4 lbs (2 kg) of salt, depending on the type of salt.
Clean any excess salt from the threads of the container opening. Screw the lid on firmly.
Immediately after each refill, run the "Rinse & Hold" program (without the Turbo function) without a load. This will remove any traces of salt from inside the wash cabinet.
Salt refill message
When the display shows Insufficient salt, refill the salt after the program has finished.
Confirm with OK.
The message will clear from the display.
If a sufficiently high concentration of salt has not yet formed, the Insufficient salt message may continue to be displayed after adding the salt. In this case, confirm again with the center button.
The Insufficient salt message is turned off if you have programmed the dishwasher to a water hardness below 4 °d (4 gr/gal).
Immediately after each refill, run the "Rinse & Hold" program (without the Turbo function) without a load.
This will remove any traces of salt from inside the wash cabinet.
If using"Tab" detergent products in your dishwasher, the messages can be turned off if desired (see "Settings - Refill display").
If you switch to using detergent that does not contain salt or rinse aid, it is important to remember to replenish the salt and rinse aid and to turn the indicators back on.
17
