Use

Standby

A few minutes after the last key is pressed or at the end of the program the dishwasher switch into Standby mode to save energy.

￿To turn the dishwasher back on press

￿.

This feature can also be turned off (see "Settings - Optimize standby"). The dishwasher will then turn off after

6hours.

If refill salt and/or rinse aid or a fault are present in the display, the dishwasher will not turn off.

The refill messages can be turned off when you use a tab detergent (see "Settings-Refill display"). Fault messages cannot be turned off.

At the end of a program

At the end of a program the optical control light flashes slowly with the door closed.

The optical function light goes out one hour after the end of a program.

At the end of a program the display shows Program finished or Drying plus with the door slightly open (if activated).

In the "Express" program, the drying fan will run for a few minutes after the program is completed.

￿Dishes tend to chip if removed still hot from the dishwasher. If the automatic door opening setting is deactivated (see "Settings - Drying plus") it is recommended to open the door manually to allow tableware to cool much faster.

￿The dishes can now be removed.

Unloading the lower basket first will prevent water drops from the upper basket and cutlery tray (depending on model) from dropping onto dishes in the lower basket.

￿Push the baskets in.

￿Turn the dishwasher off ￿.

The dishwasher continues to use electricity until turned off with the ￿ button. After a few minutes the dishwasher will turn off automatically.

41

Page 41
Image 41
Miele G 5795, G 5970 manual Standby, At the end of a program