Rinse aid and/or Add salt may | Miele G 5795, G 5970 manual

Before using for the first time

The water hardness was programmed at 1 °d (1 gr/gal) by factory default.

Select the hardness of your water supply and confirm with the center button.

See "Settings - Water hardness" for more information.

Two notes appear in the display.

After confirming these notes, Add

rinse aid and/or Add salt may

appear in the display.

Confirm these notes with OK. The display changes to the main menu.

These basic settings are saved after the first full program cycle is completed.

15

Image 15

Miele G 5795, G 5970 manual Rinse aid and/or Add salt may

Contents

Operating Instructions Dishwasher 5970 G Contents Contents Correct usage Electrical Safety Installation Use Disposal of an appliance Save These Instructions Guide to the dishwasher Control panel Energy saving washing Caring for the environment Before using for the first time To open the doorTo close the door Display function Language setting Welcome screenClock format Water hardness Time of day Rinse aid and/or Add salt may Filling the salt container Salt refill message Adding rinse aid Rinse aid Rinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Universal support bar Jumbo cup rack Adjusting the height Adjusting the upper basket Dishwasher with cutlery tray Heavily soiled items Lower basket Glass rack Removable MultiComfort insertTo remove the insert To replace the insert Vase / Bottle insert Universal support bar Foldable spikes Split cutlery tray Cutlery Cutlery insert for the cutlery basket Cutlery basket MieleCare Collection Optional accessories Detergent Use Adding detergent Selecting a program Turning on Program guide When to use Program sequence Normally soiled dishware Usage Selecting options Time display Starting a program At the end of a program Standby Interrupting a program Preparing your appliance for an extended vacation Changing a program Additional options Delay start Starting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Set the time of day Setting the clock formatLanguage Time of day Water hardness Drying Plus Adjust Sensor Wash Optimize standby Refill displayCheck filters Reorganize programs Temperature Save optionsBuzzer RemoteVision Keypad toneBrightness Memory Turning the Showroom program off Factory defaultLeaving the Settings menu Showroom program RemoteVision Technical faults Frequently asked questions Sounds or the display Problem Possible fault Solution Optical interfaceShows the fault Flashes fast, the buzzer Problems water intake/drain Saver displays FaultFlashes fast Program Energy General problems with the dishwasher Detergent lid Problem Possible fault Solution Detergent is leftDispenser at the end A program Sounds Poor cleaning results Spotted Problem Possible fault Solution Dishes are not dryGlasses Cutlery are Discolored film Problem Possible fault Solution Glasses have aBrown or blue Discoloration film Cannot be wiped off Glasses are dull MieleCare After sales servicePC Update Repairs Transport User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinet Indicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray arms Cleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connection Grounding Instructions This Appliance Must be Grounded Hardwired electrical connection Connection to the water supply Plumbing Venting the drainage system DrainagePage Alteration rights reserved Nr 909 280 G5970/G5975