Problem Possible fault Solution Optical interface | Miele G 5970

Frequently asked questions

Problem	Possible fault	Solution
The optical interface		Before trying to remedy the
flashes fast, the buzzer		fault:
sounds or the display		– Turn the dishwasher off
shows the fault:			with the button.
Technical fault FXX	There may be a	After a few seconds:
	technical fault.	– Turn the dishwasher on.
		–	Select the desired
			program.
		–	Close the door.
		If the problem persists,
		contact Technical Service.
Waterproof fault F70	The waterproof system	– Turn off the water supply.
	has activated.	Contact Miele Technical Ser-
		vice.
Automatic door closing	The door may be	–	Remove the item, if
fault F32	blocked.		necessary restart the
	blocked.		necessary restart the
			program.
		If the message shows again
		contact Miele Technical Ser-
		vice.
Automatic door opening	Possible technical fault.	–	Open the door by hand
fault F33			and restart the program.
			and restart the program.
		If the message shows again
		contact Miele Technical Ser-
		vice.

58

Image 58

Miele G 5970, G 5795 Problem Possible fault Solution Optical interface, Flashes fast, the buzzer, Sounds or the display

Contents

Operating Instructions Dishwasher 5970 G Contents Contents Electrical Safety Correct usage Installation Use Save These Instructions Disposal of an appliance Guide to the dishwasher Control panel Caring for the environment Energy saving washing To open the door Before using for the first timeTo close the door Display function Welcome screen Language settingClock format Time of day Water hardness Rinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aid Rinse aid indicator Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Foldable spikes Upper basketHinged cup rack Jumbo cup rack Universal support bar Adjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled items To replace the insert Removable MultiComfort insertTo remove the insert Glass rack Universal support bar Foldable spikes Vase / Bottle insert Cutlery Split cutlery tray Cutlery basket Cutlery insert for the cutlery basket Optional accessories MieleCare Collection Use Detergent Adding detergent Turning on Selecting a program Program guide When to use Program sequence Usage Normally soiled dishware Selecting options Starting a program Time display Standby At the end of a program Preparing your appliance for an extended vacation Interrupting a program Changing a program Delay start Additional options Starting a program before the delay start has elapsed BrilliantLight Settings menu allows you to adjust standard settings SettingsOpening the Settings menu Time of day Setting the clock formatLanguage Set the time of day Water hardness Adjust Sensor Wash Drying Plus Refill display Optimize standbyCheck filters Reorganize programs Save options TemperatureBuzzer Memory Keypad toneBrightness RemoteVision Showroom program Factory defaultLeaving the Settings menu Turning the Showroom program off RemoteVision Frequently asked questions Technical faults Flashes fast, the buzzer Problem Possible fault Solution Optical interfaceShows the fault Sounds or the display Problems water intake/drain Program Energy FaultFlashes fast Saver displays General problems with the dishwasher A program Problem Possible fault Solution Detergent is leftDispenser at the end Detergent lid Sounds Poor cleaning results Cutlery are Problem Possible fault Solution Dishes are not dryGlasses Spotted Discoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored film Repairs After sales servicePC Update MieleCare Transport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door seal Indicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray arms Installing an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Disposal of the packing material Help to protect the environmentDisposal of an old machine Electrical connection Grounding Instructions Hardwired electrical connection Grounding Instructions This Appliance Must be Grounded Plumbing Connection to the water supply Drainage Venting the drainage systemPage Alteration rights reserved Nr 909 280 G5970/G5975