Miele G 7883 manual Miele quality – Made in Germany, Design, Washing technology, Standard features

G 7883, G 7893, G 7883 CD washer-disinfectors

Illustr.: G 7883

Miele quality – Made in Germany

Dependable lab washers are indispensible in coping with the glassware used routinely in analytical experiments. Miele lab wash- ers are uncompromising in terms of quality, offering users both economical and practi- cal benefits. Each and every machine de- tail is closely geared to the requirements of laboratories requiring optimised processes, reproducible results and a high degree of reliability.

Design

•Freestanding/built-under unit

•Double-skinned design, insulated door for excellent soundproofing

•Wash cabinet and spray arms in high- grade stainless steel

•Fibre-reinforced hoses

8

Washing technology

•Hygienic freshwater system with fresh water intake for each programme stage

•2 spray arms (third spray arm on upper basket) for thorough cleaning of laborato- ry glassware

•Optimum arrangement of spray nozzles and regulatable spray arm speed for best possible cleaning results

•Thorough cleaning of lumens with injector system

•Direct docking of upper baskets to water circuit for maximum utilisation of wash liquor

Standard features

•Profi-Monobloc water softener; reactivation internalised into programme cycle with only low salt consumption; separate reactivation not required

•Powerful circulation pump, max. through- put 400 l/min

•4-fold filtration system with surface filter, coarse filter, glass splinter filter and micro-fine filter.

•Efficient steam condenser

•Flowmeter to monitor water intake quantities

•Integrated dispenser pump(s) for liquid products

•Connection option for liquid dispensing systems

•Hot-air drying on G 7893 and G 7883 CD

Interfaces

•Serial RS 232 interface for process documentation (depends on model)

•Optical interface for service and maintenance

Safety devices

•Electrical door interlock

•Programme safety cut out

•Optical and acoustic signal at end of programme

•2 sensors, 1 each for temperature control and monitoring

•Port for simple positioning of sensors in the wash cabinet for machine or process validation