Miele G 7836 Single-sourcesupplier, RO-190M2 reverse osmosis system, neighbouring unit, Status

Accessories for reprocessing with fully demineralised water

Illustration shows washer-disinfector with RO-190 M2 unit

Single-source supplier	RO-190 M2 reverse osmosis system	RO-190 M2 reverse osmosis system
Water quality plays a key role in instrument	• For a continuous supply of demineralised	• For a continuous supply of demineralised
reprocessing. Raw water contains salts	water	water
and minerals which can result in deposits	• Throughput: max. permeate capacity	• Throughput: max. permeate capacity
on the load and on machine surfaces. Fully	190 l/h	190 l/h
demineralised water is instrumental in pre-	• Reverse osmosis system in stainless-	• Stand-alone solutions for installation in
venting instrument corrosion. In installa-	steel plinth with door and floor tray	neighbouring unit
tions requiring large volumes of water, re-	Installation of 2 x 5 l supply containers in	• Stainless-steel panelling
verse osmosis installations offer an eco-	plinth	• External dimensions: H 380, W 543,
nomical alternative to demineralisation	• 2 status LEDs (conductivity/throughflow)	D 302 mm
cartridges (cf. Chart on Page 41). The use	• Max. yield approx. 50%	• Further features and technical data as per
of demineralised water can increase the	Salt filtration rate 96–98%	RO-160 M2
economic efficiency of washer-disinfectors.	Water quality approx. 5–100 µS/cm
Filtration protects against deposits likely to	(dependent on raw water supply, typically	Optional for RO-190 M2 and RO-190 M1
damage the machine, prevents downtimes	5–20 µS/cm)	(VEOLIA accessory list)
and repairs and reduces detergent costs.	Water connection to RO 3⁄4"	• Installation of a pre-filter
	Permeate outlet 3⁄4"	• Additional connection, e.g. for connection
The Miele range now includes the	Concentrate outlet 8 mm water hose	of autoclave or water dispenser tap
RO-190 M1 and RO-190 M2 reverse	Water supply pressure 2–6 bar	• Pressure tank to store demineralised
osmosis systems from VEOLIA.	Electrical connection 230 V/50 Hz	water
	Rated load 1 kW, fuse rating 10 A	• Connection to water softener
	indicators
	Electricity consumption: 0.6 kW/h*	Indicator lights
	• Cold water max. 28°C
			Status:
	max. raw water hardness 30°dGH,
			Ready or Stand by
	15°dKH (carbonate hardness)
	• Rehingeable door		Conductivity and
	• External dimensions: H 520, W 600,
			throughflow
	D 560 mm
			indicators:
			Fault	39