Miele G 7883 Water demineralisation cartridge, empty, Disposable resin, Refill set, Pre-charged

Accessories for reprocessing with fully demineralised water

E 318 water demineralisation cartridge, empty

• Charged with 20 l of single-use resin

E 315 disposable resin

• 20 l homogenous, mixed-bed resins for E 318

• Box with two 10 l bags, vacuum-packed in plastic sacks

• Replacement filter bag

E 316 refill set

• Plastic barrel with lid and funnel

• For 30 l disposable resin

G 7895/1 Aqua Purificator	E 310 water demineralisation cartridge,			LWM Module C conductivity meter
• For use on G 7883 and G 7893	pre-charged			• For E 310/E 318 water demineralisation
• Housing unit for two E 310 or E 318 dem-	• Pressure-proof stainless-steel cartridge			cartridges
ineralisation cartridges	• H 570, Ø 240 mm			• H 118, W 235, D 110 mm
• Integrated conductivity meter	• Complete with vent and pressure relief			• Electrical connection AC 230 V 50 Hz
• Generally recommended quality for the	valve			• 2 hoses, approx. 1.9 m,
final rinse < 15 µS/cm	• Contains 20 l of reusable mixed resin			3⁄4" threaded union
• H 850 (820), W 300, D 600 mm				• Integrated conductivity meter
• Freestanding unit, can be built under	Delivery capacity in litres depends on the			0–20 µS/cm
• Outer panelling in stainless steel or white	salt content of the raw water and the max.			1.5 µS/cm = Tri-distilled water
• Electrical connection AC 230 V 50 Hz	acceptable conductivity.			2.5 µS/cm = Bi-distilled water
• Water connection:				20.0 µS/cm = Single-distilled water
1 x cold water, 3⁄4" threaded union	Conductivity levels
for connection of cartridge (hose approx.		5 µS/cm	10 µS/cm
1.2 m long)	5°dH	4250	4500
1 x connection of cartridge to machine with	10° dH	2125	2250
3⁄4" threaded union (approx. 1.2 m long),	15°dH	1420	1500
2.5–10 bar flow pressure to cartridge	20°dH	1070	1125
(pressure loss approx. 1 bar per cartridge)	25°dH	850	950
	30°dH	710	750

The information given in this chart is intended only as a guide.

40