Switching on and off
Before using for the first time
^Clean the appliance interior and all accessories with lukewarm water and a little
^Use the stopper supplied to plug the defrosting outlet in the bottom of the interior of the appliance.
Important: To ensure correct functioning of the appliance, let it stand for 1½ to 2 hours after transporting it to its final location before connecting it to the mains.
Switching on
^Using a coin, turn the On/Off and temperature selector dial in a clockwise direction away from the "0" position.
The higher the setting, the lower the temperature in the appliance.
Forcing the dial beyond its range will damage it. Turn it only as far as it will go, then turn it back again.
The
The alarm indicator light will go out when the temperature in the freezer is cold enough.
To enable the temperature to get sufficiently cold inside the appliance, allow the appliance to run for a few hours before placing food in it.
Switching off
^Using a coin, turn the On/Off and temperature selector dial in an
All the indicator lights will go out and the cooling system will switch off.
Cool pack
(depending on model)
To ensure that the cool pack freezes through quickly, place it at the bottom of the freezer in a corner against two of the side walls.
The cool pack will be at its most effective after it has been in the freezer for approx. 24 hours.
To save space, place the cool pack on the freezer tray once it is frozen.
13
