Changing the door hinging

Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below.

To change the door hinging you will need the following tools:

a cross-slotted screwdriver,

a screwdriver,

a selection of Torx screwdrivers,

a spanner.

Appliance door

^Open the appliance door.

^Remove covers a, b and c with a screwdriver.

^Loosen fixing screws d at the top and the bottom slightly.

^Slide the door outwards and lift it off e.

^Unscrew the fixing screws d completely, and loosely screw them in at the top and bottom on the opposite side of the appliance f.

If you have put locking pins into the hinges to stop the door opening too far:

^Remove the locking pins from the top of the hinges.

To remove the soft-close mechanism

^Place the door with the outer side downwards on a stable surface.

^Using a screwdriver, carefully push tension spring a outwards.

Warning. The soft-close mechanism snaps shut when dismantled. Danger of injury.

38

Page 38
Image 38
Miele K9752, K9552 installation instructions Changing the door hinging, Appliance door, To remove the soft-close mechanism