Installation
Before installation
^Before installation remove the cover strip, sealing strip and other accessories from inside the appliance and from the external rear wall of the appliance.
^Do not remove the following from the back of the appliance:
–The spacers.
These ensure the gap required between the back of the appliance and the wall is maintained.
–Depending on model, the bags located between the back of the appliance and the metal grille (heat exchanger). They are important for the correct functioning of the appliance. The contents are harmless and do not contain toxic gases.
^Remove any cable clips from the back of the appliance.
^Remove the red transport fixing a, and use the stopper supplied b to plug the empty hole.
^Check that all parts at the back of the appliance are unhindered. Carefully remove any hindrance.
Does your old appliance have a different hinging mechanism?
If your old appliance had a different type of hinging, the furniture door can still be used. Remove the old hinges from the housing unit. They are no longer required because the furniture door is now fitted to the appliance door. All the necessary parts are supplied or can be ordered from the Miele Spare Parts Department.
34
