![](/images/new-backgrounds/1071741/7174183x1.webp)
Building in the appliance
Preparing the appliance | ^ Open the appliance door. | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
^Slide cover strip a into the holder in the middle of the appliance as illustrated with the bumps facing downwards. The bumps will fit into the keyhole slots.
^Position the mains electricity cable so that the appliance can be connected easily once installed.
^Push the appliance
When doing this, make sure that the mains cable does not get trapped.
^With 16 mm thick furniture walls: clip spacers b over the hinges.
^Using a screwdriver, remove cover c from the top corner of the appliance.
^Fit cover d onto fixing bracket e.
^Secure fixing bracket e to the top of the appliance with screws f
(M5 x 15).
42