Miele KM 93-2, KM83-2 manual Place the seal provided f under the edge of the cooktop

Installation instructions

		Depth	Width *
		in	(= Dimen-
		inch	sion B)
			in inch
2 zone Combiset
1	Combiset	19-5/16"	10-7/16"
2	Combisets	19-5/16"	22"
3	Combisets	19-5/16"	33-1/2"
4	Combisets	19-5/16"	45-1/32"
5	Combisets	19-5/16"	56-9/16"
4 zone Combiset
1	Combiset	19-5/16"	22"
2	Combisets	19-5/16"	45"
3	Combisets	19-5/16"	68"
Combination
One 2 zone
+ one 4 zone		19-5/16"	33-1/2"
Two 2 zone
+ one 4 zone		19-5/16"	45"
Three 2 zone
+ one 4 zone		19-5/16"	56-9/16"
One 2 zone
+ two 4 zone		19-5/16"	56-1/2"
Two 2 zone
+ two 4 zone		19-5/16"	68-1/16"

Extractor (e.g. DA 8-2)

For building in between two appliances: - Dimension B increases by 3 9/16".

For building in at the end of a combination:

-Dimension B increases by 3 7/8".

*Width includes provision for V 98 spacer bar.

Place the seal provided f under the edge of the cooktop.

loosen tighten

bAppliance

cTensioning screw d Clamp

e Countertop f Seal

Turn the tensioning screws c counter-clockwise until a resistance is felt, then turn the clamp to the left.

Place the appliance into position, turn the clamps and tighten the ten- sioning screws until the clamps press into the countertop e.

Install the stainless steel lid, EA 80 (if applicable). It is supplied with its own installation instructions.

Connect the appliance to the electri- cal supply.

When installing several Combiset units, a stainless steel spacer bar must be placed between the units. It is supplied with its own installation instructions.

23