2650 PSI Pressure Washer

3.Before connecting garden hose to water inlet, inspect inlet screen (Figure 6). Clean screen if it contains debris or replace if damaged. Refer to “O-Ring Maintenance” section if inlet screen is damaged. DO NOT run pressure washer if inlet screen is damaged.

Figure 6 — Connect Garden Hose to Water Inlet

Inspect inlet screen. DO NOT use if damaged; clean if dirty.

4.Run water through your garden hose for 30 seconds to clean out any debris.

IMPORTANT: DO NOT siphon standing water for the water supply. Use ONLY cold water (less than 100°F).

5.Connect garden hose (not to exceed 50 feet in length) to water inlet.Tighten by hand (Figure 6).

CAUTION

There MUST be at least ten feet of unrestricted garden hose between the pressure washer inlet and any flow shut off device, such as a ‘Y’ shut-off connector or other convenience-type water shut-off valve.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

6.Turn ON water, point gun in a safe direction and squeeze trigger to purge pump system of air and impurities.

WARNING

High pressure spray can cause paint chips or other particles to become airborne.

•Always wear safety goggles when using this equipment or in vicinity of where equipment is in use.

•Before starting the pressure washer, be sure you are wearing adequate safety goggles.

Checklist Before Starting Engine

Review the unit’s assembly to ensure you have performed all of the following.

1.Make sure handle is in place and secure.

2.Check that oil has been added to proper level in engine crankcase.

3.Add proper fuel to fuel tank.

4.Check for properly tightened hose connections.

5.Check to make sure that there are no kinks, cuts, or damage to the high pressure hose.

6.Provide a proper water supply at an adequate flow.

7.Be sure to read “Safety Rules” and “How To Use Your Pressure Washer” before using the pressure washer.

9

Page 8 Page 10
Page 9
Image 9
Briggs & Stratton 2650 PSI manual Checklist Before Starting Engine, Connect Garden Hose to Water Inlet
Page 8 Page 10

2650 PSI specifications

The Briggs & Stratton 2650 PSI pressure washer is a powerful and efficient cleaning machine designed for homeowners and professionals alike. Known for its sturdy build and reliable performance, this pressure washer offers an impressive combination of features that make it a must-have for tackling a variety of cleaning tasks around the home or job site.

One of the key features of the Briggs & Stratton 2650 PSI pressure washer is its powerful 3.0 GPM (gallons per minute) pump. This pump is designed to generate a maximum pressure of 2650 PSI, making it effective for removing dirt, grime, and tough stains from surfaces such as driveways, patios, decks, and vehicles. The high pressure combined with the flow rate ensures that users can complete their cleaning tasks efficiently and in less time compared to traditional cleaning methods.

Equipped with a reliable Briggs & Stratton engine, this pressure washer provides dependable starting and consistent performance over time. The engine is designed to minimize fuel consumption while maximizing power output, ensuring that users can work without frequent interruptions for refueling. Additionally, the engine features an easy-to-use recoil start system, making it user-friendly for individuals of all skill levels.

The pressure washer comes with a versatile accessory kit that includes multiple nozzles for varying pressure settings— ranging from low-pressure settings for delicate surfaces to high-pressure settings for tough jobs. This adaptability allows users to tackle different types of cleaning tasks without the need for multiple machines.

Another notable aspect of the Briggs & Stratton 2650 PSI pressure washer is its lightweight and portable design. The pressure washer is mounted on a sturdy frame with large wheels, making it easy to maneuver around a yard or driveway. The integrated handle ensures easy transportation, while the compact size allows for convenient storage when not in use.

In terms of durability, the pressure washer features a corrosion-resistant frame and components that withstand the rigors of outdoor use. This ensures longevity, allowing users to make the most of their investment.

Overall, the Briggs & Stratton 2650 PSI pressure washer blends power, efficiency, and durability. Whether you are maintaining your home or tackling larger cleaning projects, this machine provides excellent performance, making it a valuable tool for both homeowners and professionals.
Top Page Image Contents