2650 PSI Pressure Washer

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure washer in low pressure mode. Flush for one to two minutes.

2.Shut off the engine and let it cool, then remove high pressure and garden hoses. Disconnect spark plug wire from spark plug.

3.Empty the pump of liquids by pulling the engine recoil handle about 6 times.This should remove most of the liquid in the pump.

4.Use pump saver to prevent corrosion build up and freezing of pump.

5.Store unit in a clean, dry area.

Protecting the Pump

To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver to treat pump.This prevents freeze damage and lubricates pistons and seals.

NOTE: PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact the nearest authorized service center to purchase PumpSaver.

CAUTION

You must protect your unit from freezing temperatures.

•Failure to do so will permanently damage your pump and render your unit inoperable.

•Freeze damage is not covered under warranty.

CAUTION

Read and follow all cautions and warnings on the PumpSaver can label.

• Always wear eye protection when using PumpSaver.

CAUTION

PumpSaver will drip from pump after treatment and will stain wood and concrete.

• Protect surfaces from dripping PumpSaver.

To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Read and follow all instructions and warnings given on the PumpSaver container.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

STORING THE ENGINE

See the engine operator’s manual for instructions on how to properly prepare the engine for storage.

16

Page 15 Page 17
Page 16
Image 16
Briggs & Stratton 2650 PSI manual Preparing the Unit for Storage, Storing the Engine, Protecting the Pump
Page 15 Page 17

2650 PSI specifications

The Briggs & Stratton 2650 PSI pressure washer is a powerful and efficient cleaning machine designed for homeowners and professionals alike. Known for its sturdy build and reliable performance, this pressure washer offers an impressive combination of features that make it a must-have for tackling a variety of cleaning tasks around the home or job site.

One of the key features of the Briggs & Stratton 2650 PSI pressure washer is its powerful 3.0 GPM (gallons per minute) pump. This pump is designed to generate a maximum pressure of 2650 PSI, making it effective for removing dirt, grime, and tough stains from surfaces such as driveways, patios, decks, and vehicles. The high pressure combined with the flow rate ensures that users can complete their cleaning tasks efficiently and in less time compared to traditional cleaning methods.

Equipped with a reliable Briggs & Stratton engine, this pressure washer provides dependable starting and consistent performance over time. The engine is designed to minimize fuel consumption while maximizing power output, ensuring that users can work without frequent interruptions for refueling. Additionally, the engine features an easy-to-use recoil start system, making it user-friendly for individuals of all skill levels.

The pressure washer comes with a versatile accessory kit that includes multiple nozzles for varying pressure settings— ranging from low-pressure settings for delicate surfaces to high-pressure settings for tough jobs. This adaptability allows users to tackle different types of cleaning tasks without the need for multiple machines.

Another notable aspect of the Briggs & Stratton 2650 PSI pressure washer is its lightweight and portable design. The pressure washer is mounted on a sturdy frame with large wheels, making it easy to maneuver around a yard or driveway. The integrated handle ensures easy transportation, while the compact size allows for convenient storage when not in use.

In terms of durability, the pressure washer features a corrosion-resistant frame and components that withstand the rigors of outdoor use. This ensures longevity, allowing users to make the most of their investment.

Overall, the Briggs & Stratton 2650 PSI pressure washer blends power, efficiency, and durability. Whether you are maintaining your home or tackling larger cleaning projects, this machine provides excellent performance, making it a valuable tool for both homeowners and professionals.
Top Page Image Contents