Manuals / Briggs & Stratton / Lawn and Garden / Pressure Washer

Briggs & Stratton 2650 PSI manual Engine Maintenance, Nozzle Maintenance, Ring Maintenance

Models: 2650 PSI

1 36
Download 36 pages 22.31 Kb
Page 15
Image 15

2650 PSI Pressure Washer

1.Detach spray gun and nozzle extension from high pressure hose. Detach nozzle extension from spray gun and remove o-ring and screen from nozzle extension. Flush screen, spray gun, and nozzle extension with clean water to clear debris.

2.Place in-line filter screen into threaded end of nozzle extension. Direction does not matter. Push screen in with eraser end of pencil until it rests flat at bottom of opening.Take care to not bend screen.

3.Place o-ring into recess. Push o-ring snugly against in-line filter screen.

4.Assemble nozzle extension to spray gun, as described earlier in this manual.

Nozzle Maintenance

A pulsing sensation felt while squeezing the spray gun trigger may be caused by excessive pump pressure.The principal cause of excessive pump pressure is a spray tip clogged or restricted with foreign materials, such as dirt, etc.To correct the problem, immediately clean the spray tip following these instructions:

1.Shut off engine and turn off water supply.

2.Remove spray tip from end of nozzle extension.

6.Reinstall spray tip and in-line filter into nozzle extension.

7.Reconnect nozzle extension to spray gun.

8.Reconnect water supply, turn on water, and start engine.

9.Test pressure washer by operating with each Quick Connect spray tips.

O–Ring Maintenance

Purchase an O–Ring/Maintenance Kit, part number 191922GS by contacting the nearest authorized service center. It is not included with the pressure washer.This kit includes replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet provided in the kit to service your unit’s o-rings.

WARNING

The high pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious injury and possible amputation.

•NEVER repair leaking connections with sealant of any kind. Replace o-ring or seal.

3.Remove in-line filter from other end of nozzle extension.

4.Use a small paper clip to free any foreign material clogging or restricting spray tip (Figure 14).

Figure 14 — Nozzle Maintenance

Use wire here

to remove

debris.

5.Using a garden hose, remove additional debris by back flushing water through nozzle extension (Figure 15). Back flush between 30 to 60 seconds.

Figure 15 — Backflushing the Nozzle Extension

Pump Maintenance

This model does not require any pump maintenance.The pump is pre-lubricated and sealed, requiring no additional lubrication for the life of the pump.

ENGINE MAINTENANCE

See the engine operator’s manual for instructions on how to properly maintain the engine.

CAUTION

Avoid prolonged or repeated skin contact with used motor oil.

•Used motor oil has been shown to cause skin cancer in certain laboratory animals.

•Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

15

Page 14 Page 16
Page 15
Image 15
Briggs & Stratton 2650 PSI manual Engine Maintenance, Nozzle Maintenance, Ring Maintenance, Pump Maintenance
Page 14 Page 16

2650 PSI specifications

The Briggs & Stratton 2650 PSI pressure washer is a powerful and efficient cleaning machine designed for homeowners and professionals alike. Known for its sturdy build and reliable performance, this pressure washer offers an impressive combination of features that make it a must-have for tackling a variety of cleaning tasks around the home or job site.

One of the key features of the Briggs & Stratton 2650 PSI pressure washer is its powerful 3.0 GPM (gallons per minute) pump. This pump is designed to generate a maximum pressure of 2650 PSI, making it effective for removing dirt, grime, and tough stains from surfaces such as driveways, patios, decks, and vehicles. The high pressure combined with the flow rate ensures that users can complete their cleaning tasks efficiently and in less time compared to traditional cleaning methods.

Equipped with a reliable Briggs & Stratton engine, this pressure washer provides dependable starting and consistent performance over time. The engine is designed to minimize fuel consumption while maximizing power output, ensuring that users can work without frequent interruptions for refueling. Additionally, the engine features an easy-to-use recoil start system, making it user-friendly for individuals of all skill levels.

The pressure washer comes with a versatile accessory kit that includes multiple nozzles for varying pressure settings— ranging from low-pressure settings for delicate surfaces to high-pressure settings for tough jobs. This adaptability allows users to tackle different types of cleaning tasks without the need for multiple machines.

Another notable aspect of the Briggs & Stratton 2650 PSI pressure washer is its lightweight and portable design. The pressure washer is mounted on a sturdy frame with large wheels, making it easy to maneuver around a yard or driveway. The integrated handle ensures easy transportation, while the compact size allows for convenient storage when not in use.

In terms of durability, the pressure washer features a corrosion-resistant frame and components that withstand the rigors of outdoor use. This ensures longevity, allowing users to make the most of their investment.

Overall, the Briggs & Stratton 2650 PSI pressure washer blends power, efficiency, and durability. Whether you are maintaining your home or tackling larger cleaning projects, this machine provides excellent performance, making it a valuable tool for both homeowners and professionals.