Electrical connection
All electrical work should be per- formed by a qualified electrician in accordance with local and national codes.
Note to the installer:
Please leave these instructions with the consumer.
Power supply:
Please check the data plate for 240 VAC, 60 Hz, 15A, or
208 VAC, 60Hz, 15A and make sure your electrical supply matches the data plate.
Caution:
Disconnect the appliance from the main power supply before servic- ing. To reduce the risk of electric shock, make sure that the ap- pliance is properly grounded after installation.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
The appliance is provided with 3 leads; L1 (black), L2 (red) and GND (green). They must be connected to a dedi- cated line through the use of an ap- proved junction box.
For further information, see the wiring diagram provided with the appliance.
17
