Use
This cooktop is equipped with electronic touch controls activated by a light touch of the fingertip.
Only touch one control at a time. If more than one control is pressed, the entries will be ignored.
Keep the area around the touch controls clean at all times. Dirt or utensils placed on the controls may activate them.
When cleaning the cooktop, make sure the cooktop is "Off", and be careful not to accidentally turn it "On".
Never place hot pots or pans over the touch controls, as the underlying electronics may be damaged.
The cooktop is safe to clean when all the displays, including the residual heat indicators are "Off".
Before using for the first time
^To avoid scratching the ceramic glass, clean the cooktop before the first use in order to remove any dust or fine particles left over from the installation process (see "Cleaning and care"). An odor may be noticeable during the first use of each burner as the residual moisture left in the heating element insulation dries out. This is normal.
Turning on the cooktop
^Place your finger on the "On / Off" button, l, for about 2 seconds until a dot lights up above it. A
Individual burners and power settings can now be selected. If a selection is not made within a few seconds, the cooktop will turn itself off.
Selecting a burner
^Press the "s" touch control for the desired burner. A "0" will appear in its display.
The zone has now been selected.
It will not heat until a power setting is entered.
Choosing or changing a power setting
^Use the "_" touch control to select one of the 9 available power settings. Hold your finger over the
touch control until the desired power value is reached. Pressing "&" will
increase the setting, while pressing "$" will decrease it.
Recommended settings for different types of cooking can be found in the table on the following page.
12
