Timer
Automatic switch-off
To use this feature, a power setting must be selected for the desired burner. All burners can be programmed at the same time.
If the programmed time is greater than the maximum operating hours permitted, the cooktop will eventually
^Turn the desired burner on, e.g. rear right, and select a power level.
^Touch the m sensor.
Two dashes appear in the display, and the timer indicator will flash.
^Touch the m sensor again.
The indicator for the timer in the display goes out, and the automatic
^If several burners are being used, touch the m sensor repeatedly until the indicator flashes next to the burner you wish to use this function for, e.g. back right.
The indicator for the burners being used will light up clockwise, starting with the front left.
^Touch the - or + sensor until the desired time appears in the display, e.g. 15 minutes.
The time then counts down in minutes. The time remaining can be seen in the display and changed at any time by touching - or +.
If you want to set another burner to
If more than one
25