![Cut out](/images/new-backgrounds/65735/6573589x1.webp)
Installation
Cut out
^Make the countertop
Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and the right or left side. See also the "IMPORTANT SAFETY INSTRUCTIONS".
^Seal the cut surfaces with a suitable
If during installation the seal around the frame does not sit flush with the countertop in the corners, the corner radius, maximum 3/16" (4 mm), can be carefully filed down to fit.
This cooktop has a seal underneath to keep it securely in position. Spring clips are not required. Any gap between the frame and the countertop will reduce as the cooktop is used.
Installing the cooktop
^Feed the cooktop connection cable down through the
^Place the cooktop centrally in the
^Connect the cooktop to the main power supply.
^Turn the cooktop on and check the function.
45