Timer and Memory function
Switching a burner off automatically
You can set a time at the end of which a given burner will switch off automatically. This automatic
^Select a power level for the zone you require, e.g. back right, in the usual way.
^Touch the m sensor until the indicator lamp for the selected zone flashes (back right).
If more than one burner is switched on, the indicator lamps will light up clockwise beginning with the front left zone.
^Touch the - or + sensor until the time you require appears in the display, e.g. 15 minutes.
The time then counts down in minutes. The time remaining can be seen in the Timer/Memory display and changed at any time by touching - or +.
If you want to set another burner to switch off automatically, follow the same steps as described above.
If more than one
Timer starting value
The timer is set at the factory to start at 00 when the + or - sensor is touched.
This setting can be adjusted so that the time you last used appears in the display when you press + or - (see "Programming - P14.").
Example:
If P14, S1 is programmed, and the last time thetimer was used was for 5 minutes, 00 will appear in the display when you switch on the Timer; when you then touch + or
You can still select any time you want, even if you have adjusted the timer default setting.
25