Timer and Memory function
Memory function
All settings, which are set to a burner from turning on until turning off, can be recorded in a memory program. 5 frequently used operations can be recorded, but only one at a time can be recorded and used.
Memory programs can be recorded for all burners.
Multiple programs can be recorded for one burner.
Taken programs are marked with a period after the number.
Example.
P1 program not taken
P1. program taken.
To record a new program when all 5 programs are taken, one program must be deleted.
Recording a memory program
The memory program is selected first and then the burner is used as usual.
The maximum saving time is 99 minutes and a maximum of 10 changes to the power level can be made.
^Turn the cooktop on.
^Touch the M sensor.
P1 shows in the timer/memory display.
^Touch the sensor + until the desired program number shows.
^Touch the sensor M until a long signal sounds.
^Turn the desired burner on within 10 seconds.
The recording starts.
The burner indicator and the program number light during the recording in the timer/memory display.
The recording is automatically saved when the burner is turned off or by touching M until a long signal sounds. The program sequence will be shown after saving it.
The display shows the time rounded up to full minutes, during the operation the display shows the exact time.
26
