Use

Switching on

The hob must be switched on before any of the zones can be used.

Do not leave the appliance unattended whilst it is being used.

To switch the hob on

￿Touch the ON/OFF sensor ￿.

0 appears in each of the cooking zone displays. If no further entry is made, the hob will switch itself off after a few seconds for safety reasons.

To switch a cooking zone on

￿Briefly touch the area under the cooking zone display required once.

A 0 will flash in the display.

￿Whilst the 0 is flashing, select a power setting of between 1 and 9 by touching the - or + sensor.

To select cooking with Auto heat-up, press the - sensor first (see "Auto heat-up"). To select cooking without Auto heat-up, press the + sensor first.

The power setting selected flashes in the display for a few seconds to start with and then lights up constantly.

To change a power setting which has already been set, touch the sensor under the relevant cooking zone display once briefly. The power setting can then be changed using the - and + sensors.

20

Page 20
Image 20
Miele KM 5940, KM 5950 installation instructions Switching on, To switch the hob on, To switch a cooking zone on