Safety instructions for installation
The appliance must only be installed and connected to the electricity supply by a suitably qualified and competent person in strict accordance with current national and local safety regulations
(BS 7671 in the UK).
Fit the wall units and extractor hood before fitting the hob to avoid damaging the appliance.
The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C
Any backmoulds must be of
This equipment may only be used in mobile installations such as ships, if a risk assessment has been carried out by a suitably qualified engineer.
The hob may not be built in over a fridge, fridge freezer, freezer, dishwasher, washing machine or tumble dryer.
This hob must not be installed above an oven or cooker unless this has
After installing the hob, ensure that the connection cable cannot come into contact with the underside of the appliance. Make sure that there is no mechanical obstruction, such as a drawer, which could damage it.
Observe carefully the safety distances given on the following pages.
All dimensions in this instruction booklet are given in mm.
34
