Altec Lansing Imagerotate control SDP-950DXA Only, NTSC/PAL switching, Adjusting your image

Adjusting your image

Imagerotate control (SDP-950DXA Only)

For image rotation, press ROTATE button.

To rotate the image by 90˚, 180˚, 270˚, 0˚, press ROTATE button.

English French

ROTATE

TXT/IMGZOOM

NTSC/PAL switching

		7		5
			AW
			C	8
	Nega/Posi			3X3
		FREEZE
IDE		BRIGHT	ROTATE
		+
		BRIGHT	TELE
NTSC/PAL		-
		PR

- 6

ROTATE 90˚

The rotate image status will be displayed.

German

Switches Video output mode to NTSC or PAL.

	WIDE	BRIGHT
		+
EXIT		BRIGHT
	NTSC/PAL	-
SAVE		PRESET
RECALL	SAVE
	DIVIDE	ACTIVE
		SH

ROTATE

TELE

Saving image in memory (SDP-950DXA Only)

You can save the image up to 8 frames into your digital presenter's memory. After saving, you will be able to recall it.

	N
	4
	AF
	7
	Nega/Posi
	FREEZE
WIDE	BRIGHT
	+

FOCUS			TXT/IMG
				LAMP
F			RED
1
			+	BLUE
			2
	-		+
				3
		5
			-
AWC
	8		6
			3X3
ROTATE

To save the image into the memory, press SAVE button and specify the memory location within 4 seconds using the number keys from 1 through 8.

If you want to recall the saved image from memory, press RECALL button and press the memory location number within 4 seconds. If you press and hold down RECALL button, all images saved in memory are displayed one by one.

Italian

EXIT		BRIGHT	TELE
	NTSC/PAL	-
SAVE		PRESET
RECALL	SAVE
	DIVIDE	ACTIVE
		SHIFT

If you want to exit from the recall mode, press EXIT button.

The memory location numbers are printed on the right side of these buttons. For example, if you want to save the image into memory location 7, press SAVE then press AF button printed 7 at right side.

Spanish

•If you turn the power off, all the saved images will be lost.

•The image is not saved in the Rotate or Freeze status.

•Digital zoom picture is not saved, therefore when you press SAVE button under digital zoom mode, the digital presenter automatically returns to the maximum optical zoom state.

Page 25