Safety precautions

Follow these safety instructions when setting up and using your Digital Presenter:

1.Do not place the presenter on an unstable cart, stand, or table.

2.Do not use the presenter near water or sources of heat.

3.Use the type of power source indicated on the presenter. If you are not sure of the power available, consult your dealer or power company.

4.Place the presenter near a wall outlet where the plug can be easily unplugged.

5.Take the following precautions for the plug. Failure to comply with these precautions could result in sparks or fire:

Do not insert the plug into an outlet with dust present. Insert the plug firmly into the outlet.

6.Do not overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock.

7.Do not place the presenter where the cord can be walked on. It may result in fraying or damage to the plug.

8.Unplug the presenter from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

9.Do not block the slots and openings in the presenter case. They provide ventilation and prevent the presenter from overheating. Do not put the presenter on a sofa, rug, or other soft surface or in a built-in installation, unless proper ventilation is provided.

10.Never push objects of any kind through cabinet slots. Never spill liquid of any kind into the presenter.

11.Except as specifically explained in this User's Manual, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. Opening or removing covers may expose you to dangerous voltages and other hazards.

12.Unplug the presenter during lightning storms or when it will not be used for extended periods.

13.Do not place the presenter and remote controller on top of heat-producing equipment or in a heated place, such as a car.

14.Unplug the presenter from the wall outlet and refer servicing to qualified service personnel under the following conditions:

When the power cord or plug is damaged or frayed.

If liquid has been spilled into the presenter, or it has been exposed to rain or water.

If it does not operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service.

If it has been dropped or the cabinet has been damaged.

English French German

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Page 5

Italian Spanish

Page 5
Image 5
Altec Lansing SDP-950DXA, SDP-950STA user manual Safety precautions, FCC Compliance Statement